r u ready 4 ur daily dose of microacid & hapines??? - 2 new "twisted electrons" chiptune toiiiiz & gruuuv toolz @ #superbooth 2018
please meet these 2 little mthrfkkrz - made in nice, france, by our soulmates from "twisted electrons":
microacid8 - a handheld chiptune acid-bassline
itz NOT a 303 clone. nu skool, baby, nu skool!
aaaand "hapines" - a nes-inspired 8bit arcade chiptune gruuuvbox
with drums, arcadebass and arcade-lead-sound
both instruments will be 99 euro plus vat plus shipping
and are ready 4 preordering!
find more info and preorder HERE
and here some photos from early stages of the prototyping....
and if you are visiting superbooth:
go and see the twisted electrons booth at E250
and see & hear the little machines live @
liquid sky berlin
mehringdamm 61 - berlin kreuzberg
4th of may - after 8 pm
I have in front of me the BopPad from Keith McMillen Instruments. Their “smart fabric” technology has been productized in many ways such as touch interfaces for mixing, and the BopPad puts this technology into a form intended for drummers.
The BopPad is a thin, round drum pad with a playing surface roughly the size of a small tom tom on a drum kit. It’s only connection is a USB port which provides power from a connected computer. As a result, setup couldn’t be much simpler: just find an empty USB port and plug it in with the supplied USB cable. In most cases, no further installation is necessary as the BopPad is a USB class-compliant MIDI device. Just open your DAW of choice and you’ll find the BopPad waiting as an available MIDI input for you to use.
The build of the BopPad is solid—with no moving parts of any kind, this is to be expected. The design of the device is subdued with only a few unique touches, primarily from the red “USB cable protector” that sticks out of the top side of the pad. Not only does this help ensure that you don’t strike the USB cable with a stick and break it off, but it also offers some orientation for the device to ensure you have it facing the correct direction.
The BopPad comes in a nice box and is ready to be played on a table top thanks to a large, rubber surface underneath providing good contact and stability with the table’s surface. Being a drummer, it would be my desire to integrate this into my drum kit, but the BopPad doesn’t come with any kind of mounting features to support this use-case. Instead, a cymbal mount must be purchased from Keith McMillen Instruments, but I did not have this mount for this review so I cannot comment on its stability. Obviously, having the mount be an additional add-on increases the cost of the device for me, but I can understand why it is an add-on as integrating a mounting system into the BopPad itself would have increased its thickness and weight. The current super-thin, throw-into-any-bag shape of the BopPad is probably appealing to more people than those who would want to mount it into a kit.
The BopPad can be played with drumsticks or fingers (there are sensitivity adjustments via the WebEditor that can optimize performance for your particular playing style) and can sense both velocity (the strength at which you strike the surface) and continuous pressure (pressing on the surface with varying strength). Additionally, it also detects how far strikes are from the center of the pad—a radius measurement. This functionality can enable the BopPad to provide expression in a manner that is familiar to any acoustic drummer, since the location where you strike a drum on its head can have a profound impact on the timbre of the sound. Hitting a drum right in the middle often produces a deeper, yet “dead” (minimal decay) sound, while striking out towards the edge often produces and brighter, thinner sound that tends to “ring” (longer decay).
The idea of measuring a strike’s distance from the center of the pad isn’t new. You’ll find other electronic drum pads on the market that use this technology, like the Roland HandSonic pads. However, in most cases, these drum pads are married to an internal sound generation engine which automatically uses the radius information to create the proper timbres when playing. In the case of the BopPad, however, it will be up to you, the user, to figure out how to re-create this same behavior with your own software or hardware. The BopPad will provide all the data you need—note on, velocity, and radius value—to do the job, but you’ll still need to manually assign these messages to the correct parameters in your software. Depending on what software you have, its capabilities, and you own technical skill, your mileage will vary.
As with other drum pads meant to be played with the hands, the BopPad additionally segregates its playing surface into 4 quadrants, each which can output unique MIDI data so that you can essentially have 4 playing surfaces instead of just one. If mapped correctly, one could play kick, snare, hi-hat, and a cymbal entirely from a single BopPad. And if your software can’t respond correctly to the radius information transmitted from the BopPad, the pad can be configured to simply output different MIDI Notes depending on how far from the center you strike. You could, for example, have closed hi-hat towards the center of the drum with open hi-hat at the edge, or a ride cymbal at the center with the bell at the edge. Configured correctly, and you can play lots of different sounds accurately.
If you’re reading this review hoping to answer the question “Should I get the BopPad?”, then I have to admit that I can’t give a straight answer on that since the recommendation would be based highly upon your own needs. For example: If you’re looking to immediately add an array of instantly-playable and expressive percussion sounds played through a realistic drumming surface, then the BopPad isn’t for you—you’re actually looking for one of the self-contained solutions mentioned earlier, like a Roland HandSonic or Korg WaveDrum. However, if you’re curious about controlling synthesizers or other non-percussion sounds from a standard drumming surface, then this could be the answer for you.
For example, if you’re a drummer and wanted to integrate some kind of staccato synthesizer sound where you are a human arpeggiator of sorts, then the BopPad will really shine since you can trigger all the notes with precise timing while modulating the sound based on the position of the strikes. And since the BopPad is just transmitting standard MIDI messages, you could use it for other things, too, such as starting or stopping a sequencer to play along with, striking the head a few times to set the tap tempo, triggering lights, or whatever else you can technically manage to achieve. Your imagination is the only limit, but inventiveness is required.
You might have to be careful when using the BopPad in this way, especially if you have it integrated into a drum kit, because the playing surface of each quadrant can actually be rather small, especially if having to try to strike it with precision using a drum stick at an arm’s length away. For a 4-pad use-case, the BopPad would actually be better designed as a square device so that the playing area for each quadrant can be maximized. As it currently is, each quadrant is smaller because one corner has been cut off and replaced with a curve. If this does prove to be problematic, it is possible to configure the pad to be a single quadrant.
So if you have a use-case for the BopPad in mind and aren’t swayed at the prospect of doing some MIDI mapping and configuration to get the best results, then it’s definitely worth adding one to your arsenal. This appears to be a product that is robust and will stand the test of time and rigors of the road.
fkkn zombiejesusoverlord - this #eurorack #analog #vco from #acl / #audiophilecircuitsleague is a MONSTER!!!!
best "made in berlin" quality with a killer suboscillator to destroy all dancefloors of this planet with mega-über-BASS!
available artound september / october 2018
price is unknown
the info from acl:
(german version below)
ACL - Multifunction Discrete VCO
- Fine tune with 10 turn precision pot approximately 1 octave
- Coarse tune approximately 10 octaves
- V/Oct input
- Exponential modulation
- Linear modulation
- Linear detune
- LFO mode
- Sync - CV variable soft to hard sync with external “carrier “ wave input, falling/rising edge
- VCO core resetting with a gate signal
- One oscillator and one sub oscillator an octave lower per module, each with saw, inverted
saw, triangle, rectangle and sinusoidal wave.
- Independent CV PWM with saw, triangle, and inverted saw “carrier” wave options for both
the oscillator and sub oscillator
- Frequency controllable with FINE and COARSE pots
- V/Oct CV input jack, unattenuated
- Exp FM CV input jack, attenuated by CV EXP pot
- Lin FM CV input jack, attenuated by CV LIN pot
- Linear detune amount adjustable with LIN DETUNE pot
- HI/LO switch for VCO or LFO mode
- SYNC IN input jack for syncing wave
- SYNC CV IN input jack for SOFT/HARD sync amount, attenuated by CV pot and
adjustable with S/H pot
- Falling /rising edge sync switch
- GATE input jack for resetting VCO core
- CV PWM OSC input jack, attenuated by CV pot and adjustable with PW pot
- CV PWM SUB OSC input jack, attenuated by CV pot and adjustable with PW pot
- OSC OUT with five individual output jacks for saw, inverted saw, rectangle, triangle and
– OSC SUB OUT with five individual output jacks for saw, inverted saw, rectangle,
triangle and sinusoidal waves
- komplett Diskreter Audiopfad (Einzeltransistoren, etc, - keine IC´s,
- komplett from scratch neu entworfenes Design (Schaltung)
- Thermostat-Prinzip bei der Temperaturkompensation
- extrem kurze Schaltzeiten für Reset (Trigger) und Dreiecksignal-Erzeugung, komplett diskret aufgebaut
- Audiopfad komplett low noise, low distortion, Class-A
- eingebaute Suboszillator Schaltung arbeitet sehr genau, dadurch extrem kleine Schaltspitzen
- Suboszillator stellt dieselben Wellenformen wie Mutteroszillator zur Verfügung
- variable Sync (VC)
- Synchronisation wahlweise zur steigenden oder fallenden Flanke des Synchronisationssignals
- im Vergleich zu den meisten anderen VCOs sehr lineare FM
- linear Detune - Funktion für constant frequency-beating (Schwebungsfrequenz bleibt bei Änderungen der Pitch-CV nahezu konstant)
- interne Pulsweiten-Referenz für Pulswelle schaltbar zwischen steigendem/fallendem Sägezahn oder Dreieck für den Mutteroszillator
- interne Pulsweiten-Referenz für Pulswelle schaltbar zwischen steigendem/fallendem Sägezahn oder Dreieck für den Suboszillator
- Gate-Eingang für Reset bei NoteOn (Gate High)
visit ACL s website: www.audiophilecircuitsleague.com
acl on instagram: www.instagram.com/audiophilecircuitsleague/
acl on facebook: HERE
acl on youtube: HERE
acl on googe+. HERE
rerelease of SNAZZY FX cult pedals "wow & flutter" / "mini-ark" & "tracer city" - in cooperation with erica synths
the "old" psychedelic experimental stompboxes by SNAZZY FX, nyc are available again!
now manufactured in europe by rigabased cult synthbrand "erica synths"
wow & flutter - a glitch / tapenoise mindbending delay
300 EUR + vat + shipping
mini-ark - a "guitar synth" but you can feed almost everything into including the snorring of your dog
350 EUR + vat + shipping
tracer city - well - you have to check this crazy babe out on your own!!!
390 EUR + vat + shipping
which one to choose? all 3 of course! perfect bundle / perfect tools for experimental guitar- & bassplayers, synth-and / or noiseartists, sounddesigners and prdoucers.
for use in the studio or on stage.
try them out, beloved mthrfkkrzzzzzz!
more info: www.snazzyfx.com
you are coming to superbooth?
come over to the erica synths booth to check them out or come over to liquid sky berlin on friday the 4th. of may for the erica synths / zen delay / snazzy fx party:
talking about liquid sky berlin:
in fall 2018 erica synths and liquid sky berlin are organising a dan snazelle / snazzy fx europa tour with workshops and club- & experimental lounge live performances.
booking requests here:
subject : snazzy europe tour 2018
***gear news leak***gear news leak***
looks like londonbased cult label ninja tune has a piece of hardware for deejays, live acts, beatdesigners, studiophreaks and producers in the pipeline : we see massive bakkelitestyle knobs, a valve, stereo ins and outs, a delay- and a Synth-Filter section - a wonderful looking and solid piece of geek boutique.
It was not possible to get an official statement from the label so we can t do anything but inpatiently wait for more detailed news.
photos of the prototype shot at liquid sky berlin / kreuzberg
such a great project!
thanx for the link, Moisés Horta Valenzuela
#eurorack #synth #modular #synthesizer #module