attack of the monster oscillator : acl - multi function discrete vco - made in berlin

fkkn zombiejesusoverlord - this #eurorack #analog #vco from #acl / #audiophilecircuitsleague is a MONSTER!!!!

best "made in berlin" quality with a killer suboscillator to destroy all dancefloors of this planet with mega-über-BASS!

available artound september / october 2018
price is unknown 

the info from acl:
(german version below)


ACL - Multifunction Discrete VCO

Features:

- Fine tune with 10 turn precision pot approximately 1 octave
- Coarse tune approximately 10 octaves
- V/Oct input
- Exponential modulation
- Linear modulation
- Linear detune
- LFO mode
- Sync - CV variable soft to hard sync with external “carrier “ wave input, falling/rising edge
sync
- VCO core resetting with a gate signal
- One oscillator and one sub oscillator an octave lower per module, each with saw, inverted
saw, triangle, rectangle and sinusoidal wave.
- Independent CV PWM with saw, triangle, and inverted saw “carrier” wave options for both
the oscillator and sub oscillator
Functions:
- Frequency controllable with FINE and COARSE pots
- V/Oct CV input jack, unattenuated
- Exp FM CV input jack, attenuated by CV EXP pot
- Lin FM CV input jack, attenuated by CV LIN pot
- Linear detune amount adjustable with LIN DETUNE pot
- HI/LO switch for VCO or LFO mode
- SYNC IN input jack for syncing wave
- SYNC CV IN input jack for SOFT/HARD sync amount, attenuated by CV pot and
adjustable with S/H pot
- Falling /rising edge sync switch
- GATE input jack for resetting VCO core
- CV PWM OSC input jack, attenuated by CV pot and adjustable with PW pot
- CV PWM SUB OSC input jack, attenuated by CV pot and adjustable with PW pot
- OSC OUT with five individual output jacks for saw, inverted saw, rectangle, triangle and
sinusoidal waves
– OSC SUB OUT with five individual output jacks for saw, inverted saw, rectangle,
triangle and sinusoidal waves

- komplett Diskreter Audiopfad (Einzeltransistoren, etc, - keine IC´s,
- komplett from scratch neu entworfenes Design (Schaltung)
- Thermostat-Prinzip bei der Temperaturkompensation
- extrem kurze Schaltzeiten für Reset (Trigger) und Dreiecksignal-Erzeugung, komplett diskret aufgebaut
- Audiopfad komplett low noise, low distortion, Class-A
- eingebaute Suboszillator Schaltung arbeitet sehr genau, dadurch extrem kleine Schaltspitzen
- Suboszillator stellt dieselben Wellenformen wie Mutteroszillator zur Verfügung
- variable Sync (VC)
- Synchronisation wahlweise zur steigenden oder fallenden Flanke des Synchronisationssignals
- im Vergleich zu den meisten anderen VCOs sehr lineare FM
- linear Detune - Funktion für constant frequency-beating (Schwebungsfrequenz bleibt bei Änderungen der Pitch-CV nahezu konstant)
- interne Pulsweiten-Referenz für Pulswelle schaltbar zwischen steigendem/fallendem Sägezahn oder Dreieck für den Mutteroszillator
- interne Pulsweiten-Referenz für Pulswelle schaltbar zwischen steigendem/fallendem Sägezahn oder Dreieck für den Suboszillator
- Gate-Eingang für Reset bei NoteOn (Gate High)

visit ACL s website: www.audiophilecircuitsleague.com
acl on instagram: www.instagram.com/audiophilecircuitsleague/
acl on facebook: HERE
acl on youtube: HERE
acl on googe+. HERE